-
Six battery maintenance attention
2008-09-25
分类:
版权声明:转载时请以超链接形式标明文章原始出处和作者信息及本声明
http://laptoppopbattery.blogbus.com/logs/29602666.html
First, when the storage power loss. Xinhua refers deficit state did not use the battery charge in a timely manner. Loss of idle state power longer, more serious damage to the laptop battery.
Second, the test on a regular basis. In the process, if electric cars continued the trip mileage in a short period of time all of a sudden drop in more than 10 kilometers, then the battery is likely to at least a piece of broken cell battery appears, softened plate, the plate active substances, such as falling short-circuit phenomenon . At this point, the batteries should be repaired in time to professional bodies to inspect, repair and distribution group.
Third, to avoid high-current discharge. Electric cars at the starting line, manned, uphill, please use pedal power to help avoid a momentary high-current discharge. High-current discharge easily lead to the creation of lead sulfate crystallization, to the detriment of the physical properties of the sony battery plate.
Fourth, the right to master the charging time.
In the process, according to the charging time to grasp the actual situation, in general batteries are recharged at night, with an average time of 8 hours. If the shallow discharge, the battery will soon be filled, the charge will continue to have sufficient, and that leads to cell loss, fever, to reduce battery life. Therefore, the battery discharge to a depth of 60% -70%, a charge the best power.
Five to prevent exposure. Electric cars is prohibited under the sun exposure. High temperature environment will increase the pressure on the internal battery by batteries pressure limiting valve automatically opens, is a direct consequence of the increase in the loss of water, batteries, PCGA-BP71 and excessive water loss will inevitably trigger cell activity decreased to accelerate the plate to soften, charging shell Body heat, from drums, such as deformation of fatal injury.
Six to avoid charge when Heat pull the plug. Charger output plug loose contact surface oxidation, and other phenomena will lead to Plug Charging hot, the heat too long may lead to short-circuit charging plug directly damage the charger and bring unnecessary loss. So when they found out that the situation should be cleared in a timely manner or replacement connector oxide.随机文章:
Use of the MCU to achieve long battery life 2008-08-22Drive 2008-08-14IBM ThinkPad R51 battery 2008-07-22Dell 1691P battery 2008-07-21
收藏到:Del.icio.us







